Quasi-steady aerodynamic characteristics of Terminal Sensitive Bullets with short cylindrical portion

The aerodynamic characteristics are vital for short cylindrical Terminal Sensitive Bullets(TSB)with low aspect ratio,especially in terminal trajectory.Currently,there is little research in terms of the TSB and short cylinder with two free ends,and particularly in this trajectory,where the scanning angle β and roll angle α vary over a broad range between 0° and 180°.In this work,wind tunnel experiments are first conducted to learn the effects of Reynolds number and scanning angle on aerodynamic parameters for short cylinder with aspect ratio L/D = 1.Similar to infinite cylinder,for the short cylinder with two free ends,the drag crisis phenomenon still exists in the critical regime 1.7 × 105 ≤ Re ≤ 6.8 × 105.Then 3D simulations are performed to demonstrate the aerodynamic characteristics of short cylinder and TSB over a broad range of Re,L/D,α and β.The sensitivity analysis of time step and grid are presented as well.When β=0°,for short cylinder,the drag crisis phenomenon was also observed in the simulation,but not as obvious as in the wind tunnel test.In some attitudes,there is an obvious Kármán vortex in the wake of short cylinder and TSB.The correlation between time-averaged aerodynamic coefficients and L/D,Re,α&β is discussed.The vortex shedding frequency and shear layer behavior are obtained for quasi-steady and unsteady flow.Finally,the effect of end's shape on drag reduction and vortex shedding frequency is analyzed.     

具有可控细节层次的阴影空间新算法

首先阐述了阴影空间算法 ,然后对基于层次结构化包围盒和光线投射技术的阴影空间新算法进行了详细地研究。采用本算法可使生成的阴影效果具有可控细节层次。     

区域结构及多尺度纹理分析

结合纹理的结构分析方法 ,提出一种区域状结构 ,并把这种结构作为尺度空间中的特征。在基于区域状特征结构的尺度空间中 ,结构状纹理分析可转化为尺度空间中对特征结构的分析 ,从而实现了对纹理的多尺度分析。理论分析和实验结果证明了这种分析方法的有效性     

钝体高超声速气动加热与结构热传递耦合的数值计算

气动加热与结构热传递耦合问题在航天和工程应用领域非常重要。分别采用松耦合与紧耦合方法,数值模拟了高超声速二维圆管绕流的流场与结构传热耦合的非定常过程。在紧耦合方法中,流场部分采用基于Navier Stokes方程的有限体积法,将AUSM+格式与时间方向的显式多步Runge Kutta法结合;结构传热部分采用基于二维热传导方程的Galerkin有限元法。流场与结构区通过交界面的热流和温度边界条件实现耦合。计算结果分别与实验、文献做了对比,结构内部温度变化关系以及壁面的热流分布均较好地吻合。两种耦合方式的计算结果对比表明,对于流场特征时间远小于结构传热特征时间的问题,松耦合方法计算效率高,精度与紧耦合方法接近。     

基于神经网络和模糊综合评判的梁故障诊断研究

设计了一个简单的人工智能故障诊断系统模型,它包括知识库、模糊推理、神经网络和控制模块等。模糊推理模块利用模糊综合评判方法进行故障的预诊,神经网络模块采用竞争学习方法完成故障的确诊。文中对悬臂梁的单一故障和复合故障等七种模式进行了诊断分析,均获得了正确的诊断结果。     

Some elementary ideas concerning the complexity of system structure

A system of iid Bernoulli components is the starting point in the statistical theory of reliability. This simplification allows for the development of a rich, though elementary, theory for the structure of the system. Two representations play a prominent role in the study of structural reliability. One is the minimal path set representation and the other is the signature representation. By combining the two representations with the Gibbs measure for the state of components, one obtains terms that can be interpreted as the complexity of the system structure. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

固体发动机星形药柱的形状优化分析

为了极大地提高发动机的结构完整性能,利用MSC.Nastran软件的结构优化功能,对星形药柱发动机进行了形状优化分析.探讨了发动机形状优化中位移模式和辅助模型的建立方法,根据发动机的结构和受力特点,建立了星形药柱的平面应变模型,对星形药柱的控制参数进行了灵敏度分析,并在此基础上对星形药柱进行了形状优化.优化结果表明:增大星边夹角和顶弧倒角可有效地缓解应力应变的集中程度.     

疲劳裂纹闭合的非线性超声在线测量

建立了外部载荷作用下用非线性振动-声场调制指数表征裂纹尺寸的数学模型。根据对外载荷与塑性致闭应力共同作用下裂纹面的开闭响应的分析,提出了裂纹张开和闭合应力的在线测量方法。在一块含中心穿透裂纹的铝合金薄板试件上进行了裂纹闭合参数的测量实验,实验结果表明,使用振动-声场调制技术在线测量裂纹闭合参数是可行且有效的,且该方法还能用于分析小裂纹的特殊开闭行为。     

基于解析结构模型的网络空间信息防御能力分析

针对网络空间信息防御需求及特点,利用解析结构模型方法,分析网络空间信息防御能力的影响要素及其关系,建立网络空间信息防御能力影响要素的层次结构模型,并找出核心要素和关键环节,为网络空间信息防御能力建设提供决策支持。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.